http://www.defencewireless.co.in Latest Products Tue, 21 Apr 2026 13:00:17 +0530 en-us http://www.defencewireless.co.in http://www.defencewireless.co.in/military-grade-antenna.htm http://www.defencewireless.co.in/military-grade-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 http://www.defencewireless.co.in/20-3000-mhz-discone-antenna.htm http://www.defencewireless.co.in/20-3000-mhz-discone-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 Design Features: DW-20-3000 MHz VHF UHF aviation band heavy duty fully welded discone antenna is specially designed to survive the most extreme conditions, where conventional antennas often fail. Due to its low VSWR through entire band from DW-20-3000 MHz., this discone antenna can be used as a transmitting and receiving antenna with high efficiency, to meet the broadband requirement of a base station antenna such as spectrum monitoring or jamming application without need of multiple antennas. DW-20-3000 MHz wideband discone antenna is extremely rugged, fully welded at all junctions, all weather model, does not require any field tuning or adjustments. The wide vertical beam-width of discone antennas allows clear communication for ground, sea, and ground-to-air applications. The fully welded wide band discone antenna is highly suitable for Oceanic application especially in arctic region where vibration and ice loading are main concern. Constructions: The fully welded wide band discone antenna uses 6063T6 Mil grade ultra corrosion resistant architectural anodized aluminum alloy with powder coating finish to protect the antenna further from severe environmental condition. All internal junctions are enclosed within a ruggedized radome to ensure survivability in the worst environments. The powder coating on all metal surfaces ensures complete protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and sand storms in desert environments. Discone Antenna termination enclosed inside the mounting pipe for complete weather protection. All the screws, nuts and bolts of heavy duty wide band discone antenna are made of type 316 marine grade stainless steel. Electrical Specifications: Frequency Range DW-20-3000 MHz Gain 2.15 dBi Bandwidth DW-20-3000 MHz Polarization Vertical Input Impedance 50 Ohms Radiation Pattern Omni-directional VSWR - Equal To or Better Then 2:1 RF Power Handling Capacity 500 Watts Input Termination N-Female Mechanical Specifications: Antenna Materials 6063T6 Aluminum Alloy Mounting Hardware -Materials Marine Grade Stainless Steel Wind Rating 200 Km/Hr. Overall Length 1.2 Meters Shipping Length 1.25 Meters Maximum Mount Pipe Diameter 52 mm (2 Inches) Gross Weight 6.5 Kgs. Environmental Specifications: Operating Temperature (-)30 to +70 Degrees Celsius Storage Temperature (-)40 to +80 Degrees Celsius Humidity 0 to 95% RH http://www.defencewireless.co.in/dw-100-400-mhz-discone-antenna.htm http://www.defencewireless.co.in/dw-100-400-mhz-discone-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 Design Features: DW-100-400 MHz VHF UHF aviation band heavy duty fully welded discone antenna is specially designed to survive the most extreme conditions, where conventional antennas often fail. Due to its low VSWR through entire band from DW-100-400 MHz., this discone antenna can be used as a transmitting and receiving antenna with high efficiency, to meet the broadband requirement of a base station antenna such as spectrum monitoring or jamming application without need of multiple antennas. DW-100-400 MHz wideband discone antenna is extremely rugged, fully welded at all junctions, all weather model, does not require any field tuning or adjustments. The wide vertical beam-width of discone antennas allows clear communication for ground, sea, and ground-to-air applications. The fully welded wide band discone antenna is highly suitable for Oceanic application especially in arctic region where vibration and ice loading are main concern. Constructions: The fully welded wide band discone antenna uses 6063T6 Mil grade ultra corrosion resistant architectural anodized aluminum alloy with powder coating finish to protect the antenna further from severe environmental condition. All internal junctions are enclosed within a ruggedized radome to ensure survivability in the worst environments. The powder coating on all metal surfaces ensures complete protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and sand storms in desert environments. Discone Antenna termination enclosed inside the mounting pipe for complete weather protection. All the screws, nuts and bolts of heavy duty wide band discone antenna are made of type 316 marine grade stainless steel. Electrical Specifications: Frequency Range DW-100-400 MHz Gain 2.15 dBi Bandwidth DW-100-400 MHz Polarization Vertical Input Impedance 50 Ohms Radiation Pattern Omni-directional VSWR - Equal To or Better Then 2:1 RF Power Handling Capacity 500 Watts Input Termination N-Female Mechanical Specifications: Antenna Materials 6063T6 Aluminum Alloy Mounting Hardware -Materials Marine Grade Stainless Steel Wind Rating 200 Km/Hr. Overall Length 1.2 Meters Shipping Length 1.25 Meters Maximum Mount Pipe Diameter 52 mm (2 Inches) Gross Weight 6.5 Kgs. Environmental Specifications: Operating Temperature (-)30 to +70 Degrees Celsius Storage Temperature (-)40 to +80 Degrees Celsius Humidity 0 to 95% RH. http://www.defencewireless.co.in/20-1000-mhz-lpda-log-periodic-dipole-antenna.htm http://www.defencewireless.co.in/20-1000-mhz-lpda-log-periodic-dipole-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 MILITARY LOG PERIODIC DIPOLE ANTENNA Design Features: The LPL-20-1000 log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 20-1000 MHz bands. The complete antenna is supplied with powder coating to protect it further from severe environmental conditions. The extra spacers are used between the support booms to improve mechanical durability of antenna. The antenna can be assembled in less than 10 minutes by two technicians. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, scanning and jamming applications due to its broad band design feature. The shipping length of antenna is 10 feet making it highly suitable for mobile and tactical application. Two mounting brackets are fitted on the support boom one for horizontal polarization and other for vertical polarization. Constructions: The LP-20-1000 assembled log periodic antennas outer-most dimensions are 6.5 meters (21.3 feet) long and 7.5 meters (24.5 feet) wide. The antenna has removable elements, the longest of which is 3.5 meters. All elements are supplied in two segments for easy of shipping and handling. Similarly the support boom of antenna is supplied in two sections for easy of shipping/transportation and handling. The elements are attached via stainless steel stud systems with spring washer at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel. Specially designed mounting arrangement results in fast installation. The polarization can be changed from horizontal or vertical and vice-versa. Electrical Specifications: Frequency Range 20-1000 MHz Gain 9 dBi Bandwidth Entire Band Polarization Vertical or Horizontal Input Impedance 50 Ohms Radiation Pattern Directional Horizontal Beamwidth -Half Power Points 110 +/-10 Degrees Front to Back Ratio 14 +/-2 dB. VSWR - Equal To or Better Then <1:3.0 RF Power Handling Capacity 1000 Watts Input Termination N-Female Lightning Protection Direct Ground Mechanical Specifications: Antenna Materials 6063T6 Aluminum Mounting Hardware -Materials Marine Grade Stainless Steel Wind Rating 180 KMPH Overall Length 6 Meters Shipping Length 3.75 Meters Support Boom - Material - O.D. Aluminum Square Tube Elements - Materials - Cross Section - Outer Diameter Aluminum Round Tube Insulator Material Teflon& Delrin Maximum Mount Pipe Diameter 50-102 mm ( 2-4 Inches) Gross Weight 40 Kgs http://www.defencewireless.co.in/100-500-mhz-lpda-log-periodic-dipole-antenna.htm http://www.defencewireless.co.in/100-500-mhz-lpda-log-periodic-dipole-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 MILITARY LOG PERIODIC DIPOLE ANTENNA Design Features: The LPL-100-500 Mhz log periodic dipole antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy and designed to provide wideband directional transmission/reception of radio signals from 100-500 Mhz bands. The complete antenna is supplied with powder coating to protect it further from severe environmental conditions. The extra spacers are used between the support booms to improve mechanical durability of antenna. The antenna can be assembled in less than 10 minutes by two technicians. This log periodic dipole antenna system is particular suitable for transmission, reception, monitoring, scanning and jamming applications due to its broad band design feature. The shipping length of antenna is 10 feet making it highly suitable for mobile and tactical application. Two mounting brackets are fitted on the support boom one for horizontal polarization and other for vertical polarization. Constructions: The LP-100-500 Mhz assembled log periodic antennas outer-most dimensions are 6.5 meters (21.3 feet) long and 7.5 meters (24.5 feet) wide. The antenna has removable elements, the longest of which is 3.5 meters. All elements are supplied in two segments for easy of shipping and handling. Similarly the support boom of antenna is supplied in two sections for easy of shipping/transportation and handling. The elements are attached via stainless steel stud systems with spring washer at points along the boom. The log periodic antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of log periodic dipole antenna are made of type 316 marine grade stainless steel. Specially designed mounting arrangement results in fast installation. The polarization can be changed from horizontal or vertical and vice-versa. Electrical Specifications: Frequency Range 100-500 Mhz Gain 9 dBi Bandwidth Entire Band Polarization Vertical or Horizontal Input Impedance 50 Ohms Radiation Pattern Directional Horizontal Beamwidth -Half Power Points 110 +/-10 Degrees Front to Back Ratio 14 +/-2 dB. VSWR - Equal To or Better Then <1:3.0 RF Power Handling Capacity 1000 Watts Input Termination N-Female Lightning Protection Direct Ground Mechanical Specifications: Antenna Materials 6063T6 Aluminum Mounting Hardware -Materials Marine Grade Stainless Steel Wind Rating 180 KMPH Overall Length 6 Meters Shipping Length 3.75 Meters Support Boom - Material - O.D. Aluminum Square Tube Elements - Materials - Cross Section - Outer Diameter Aluminum Round Tube Insulator Material Teflon& Delrin Maximum Mount Pipe Diameter 50-102 mm ( 2-4 Inches) Gross Weight 40 Kgs. http://www.defencewireless.co.in/2-30-mhz-hf-broadband-antenna.htm http://www.defencewireless.co.in/2-30-mhz-hf-broadband-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 ELECTRICAL SPECIFICATIONS : Frequency Range 1.5 - 30 MHz. Gain Unity  Bandwidth Full 1.5 to 30 MHz. Polarization Horizontal or Inverted "V" Input Impedance 50 Ohms. Radiation Pattern Omni-directional VSWR 2 : 1  RF Power Handling Capacity 500 Watts. Input Termination N-Female Lightning Protection Direct Ground  MECHANICAL SPECIFICATIONS: Net Weight 4 Kgs. (antenna only) Wind Rating 160 Km/Hr. Balun Base Diameter 65 mm (Balun) Base Material Nylon (Balun) Overall Length 23 Meters. Shipping Box Size 0.60 x 0.15 x 0.15 Meter Dipole Materials Twisted Copper with Insulator Spreaders Materials PVC Pipe Insulator Materials Nylon Recommended Mast Height 9 Meters (30 Feet) Distance between Mast 25 Meters   ENVIRONMENTAL SPECIFICATIONS: Operating Temperature (-)25 to +65 Degrees Celsius Storage Temperature (-)40 to +75 Degrees Celsius Humidity 0 to 95% RH. http://www.defencewireless.co.in/136-174-mhz-double-stacked-dipole-array-antenna.htm http://www.defencewireless.co.in/136-174-mhz-double-stacked-dipole-array-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 DESIGN FEATURES :The DW-SD3150 high performance VHF lower band stacked dipole array is designed for use with highly populated radio sites requiring long haul omni-directional coverage. The  DW-SD3150 is heavy duty stacked dipole array features, wide bandwidth, high gain, high power handling capacity, low VSWR, low noise performance and null filling coverage with omni-directional characteristics. This stacked dipole array is highly suitable as base station antennas for PMR, Repeater and Paging sites.  CONSTRUCTIONS: The SD3-150 Stacked Dipole Array consists of TWO folded dipoles stacked vertically, fed in phase. This Stacked Dipole Antenna operates at D.C. ground for protection against lightning. Termination of phasing harness cable sealed by heat shrinking tube making stacked dipole antenna waterproofing. The 3.6 Meters (12 feet) long central mast for mounting the dipoles is shipped in two sections of 1.8 Meters (6 feet) each for easy of shipping. The stacked dipole antenna is suitable to mount on the top of tower and is supplied with two mounting brackets. RADIATION PATTERN :When the TWO dipoles are arranged 180 degrees apart around the central mast, 3dBd. (5.15dBi) omni-directional radiation pattern results. Aligning the TWO dipoles collinearly (facing in one direction) a 6dBd. (8.15dBi) offset radiation pattern is obtained. The radiation pattern can be changed in the field by use of common hand tools.   ELECTRICAL SPECIFICATIONS: Frequency Range 136 -174 MHz. Gain 3dBd Omni /6dBd Offset Bandwidth 10 MHz. Polarization Vertical Input Impedance 50 Ohms. Radiation Pattern Omni Directional Vertical Beam-width –Half Power Points 36 Degrees  VSWR – Less than 1.5 : 1  RF Power Handling Capacity 500 watts. Input Termination N-Female Lightning Protection Direct Ground MECHANICAL SPECIFICATIONS : Mounting Hardware Stainless Steel Wind Rating 200 Km/Hr. Overall Length 3.6 Meters (12 feet) Support Pipe Aluminum – Outer Diameter 51 mm Dipoles Aluminum – Outer Diameter 12.7 mm Shipping Length 1.8 Meters (6 feet) Maximum Mount Pipe Diameter 52 mm (2 Inches) Gross Weight 10  Kgs. ENVIRONMENTAL SPECIFICATIONS: Operating Temperature (-)30 to +70 Degrees Celsius Storage Temperature (-)40 to +80 Degrees Celsius Humidity 0 to 95% RH. http://www.defencewireless.co.in/136-174-mhz-0-dbi-gp-ground-plane-antenna.htm http://www.defencewireless.co.in/136-174-mhz-0-dbi-gp-ground-plane-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 A 0 dBi 136 MHz GP Antenna is a ground plane (GP) antenna designed for operation at 136 MHz within the VHF band. With a gain of 0 dBi, it offers enhanced signal strength and extended coverage compared to standard GP antennas. Featuring a vertical radiator and ground radials, it provides omnidirectional radiation, making it ideal for land mobile radio, public safety, and commercial communication systems. Built for outdoor use, it ensures reliable performance in various weather conditions. http://www.defencewireless.co.in/136-174-mhz-3-dbi-gp-ground-plane-antenna.htm http://www.defencewireless.co.in/136-174-mhz-3-dbi-gp-ground-plane-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 http://www.defencewireless.co.in/136-174-mhz-6-dbi-gp-ground-plane-antenna.htm http://www.defencewireless.co.in/136-174-mhz-6-dbi-gp-ground-plane-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 A 6 dBi 136 MHz GP Antenna is a ground plane (GP) antenna designed for operation at 136 MHz within the VHF band. With a gain of 6 dBi, it offers enhanced signal strength and extended coverage compared to standard GP antennas. Featuring a vertical radiator and ground radials, it provides omnidirectional radiation, making it ideal for land mobile radio, public safety, and commercial communication systems. Built for outdoor use, it ensures reliable performance in various weather conditions. http://www.defencewireless.co.in/68-88-mhz-0-dbi-gp-ground-plane-antenna.htm http://www.defencewireless.co.in/68-88-mhz-0-dbi-gp-ground-plane-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 A 0 dBi 68-88 MHz GP Antenna is a ground plane (GP) antenna designed for operation at 68-88 MHz within the UHF band. With a gain of 0 dBi, it offers enhanced signal strength and extended coverage compared to standard GP antennas. Featuring a vertical radiator and ground radials, it provides omnidirectional radiation, making it ideal for land mobile radio, public safety, and commercial communication systems. Built for outdoor use, it ensures reliable performance in various weather conditions. http://www.defencewireless.co.in/68-88-mhz-3-dbi-gp-ground-plane-antenna.htm http://www.defencewireless.co.in/68-88-mhz-3-dbi-gp-ground-plane-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 A 3 dBi 68-88 MHz GP Antenna is a ground plane (GP) antenna designed for operation at 68-88 MHz within the UHF band. With a gain of 3 dBi, it offers enhanced signal strength and extended coverage compared to standard GP antennas. Featuring a vertical radiator and ground radials, it provides omnidirectional radiation, making it ideal for land mobile radio, public safety, and commercial communication systems. Built for outdoor use, it ensures reliable performance in various weather conditions. http://www.defencewireless.co.in/68-88-mhz-6-dbi-gp-ground-plane-antenna.htm http://www.defencewireless.co.in/68-88-mhz-6-dbi-gp-ground-plane-antenna.htm Thu, 16 Apr 2026 00:00:00 +0530 A 6 dBi 68-88 MHz GP Antenna is a ground plane (GP) antenna designed for operation at 68-88 MHz within the UHF band. With a gain of 6 dBi, it offers enhanced signal strength and extended coverage compared to standard GP antennas. Featuring a vertical radiator and ground radials, it provides omnidirectional radiation, making it ideal for land mobile radio, public safety, and commercial communication systems. Built for outdoor use, it ensures reliable performance in various weather conditions. http://www.defencewireless.co.in/40-6000-mhz-sma-telescopic-antenna.htm http://www.defencewireless.co.in/40-6000-mhz-sma-telescopic-antenna.htm Fri, 17 Apr 2026 00:00:00 +0530 Product Features Product Name: SMA Male Connector Radio Telescopic Antenna 8 Sections. Total Length of Antenna: 155mm | Extended Total Length: 735mm/28.9IN | Antenna Diameter: Approx 7mm. Color : Silver Tone | Section:8 Sections | Connector Type : SMA Male. Used for SMA female adapter television, radio, remote control, lamps and lanterns, VCD, and other special configuration communications antenna. Package:2 x SMA Male Telescopic Antennas | Net: 50g. Product Specifications Product Name: SMA Male Connector Radio Telescopic Antenna 8 Sections.Total Length of Antenna: 155mmExtended Total Length: 735mmAntenna Diameter: Approx 7mmColor : Silver ToneSection:8 SectionsConnector Type : SMA MaleUsed for SMA female adapter television, radio, remote control, lamps and lanterns, VCD, and other special configuration communications antenna.Package:2 x SMA Male Telescopic AntennasNet: 50g http://www.defencewireless.co.in/coaxial-cables.htm http://www.defencewireless.co.in/coaxial-cables.htm Thu, 16 Apr 2026 00:00:00 +0530 http://www.defencewireless.co.in/power-adaptors.htm http://www.defencewireless.co.in/power-adaptors.htm Thu, 16 Apr 2026 00:00:00 +0530 http://www.defencewireless.co.in/high-frequency-coaxial-cable.htm http://www.defencewireless.co.in/high-frequency-coaxial-cable.htm Thu, 16 Apr 2026 00:00:00 +0530 An SMP Male to SMP Male RF Coaxial Cable is a high-performance coaxial cable assembly featuring SMP male connectors on both ends. Known for their ultra-miniature size and push-on locking mechanism, SMP connectors support very high-frequency signals, often up to 40 GHz or beyond. This cable is ideal for compact RF/microwave applications like aerospace, defense, and advanced wireless systems, offering low insertion loss, excellent shielding, and reliable connections in tight spaces.An SMP Male to SMP Male RF Coaxial Cable is a high-performance coaxial cable assembly featuring SMP male connectors on both ends. Known for their ultra-miniature size and push-on locking mechanism, SMP connectors support very high-frequency signals, often up to 40 GHz or beyond. This cable is ideal for compact RF/microwave applications like aerospace, defense, and advanced wireless systems, offering low insertion loss, excellent shielding, and reliable connections in tight spaces. http://www.defencewireless.co.in/sma-male-to-sma-male-rf-coaxial-cable.htm http://www.defencewireless.co.in/sma-male-to-sma-male-rf-coaxial-cable.htm Thu, 16 Apr 2026 00:00:00 +0530 An SMA Male to SMA Male RF Coaxial Cable is a coaxial cable assembly featuring SMA male connectors on both ends. Designed for high-frequency signal transmission, it offers low loss and excellent shielding, suitable for frequencies up to 18 GHz or higher. Commonly used in wireless communication, test equipment, antennas, and RF systems, this cable provides reliable and precise connections in compact setups.An SMA Male to SMA Male RF Coaxial Cable is a coaxial cable assembly featuring SMA male connectors on both ends. Designed for high-frequency signal transmission, it offers low loss and excellent shielding, suitable for frequencies up to 18 GHz or higher. Commonly used in wireless communication, test equipment, antennas, and RF systems, this cable provides reliable and precise connections in compact setups. http://www.defencewireless.co.in/sma-male-to-sma-male-adaptor.htm http://www.defencewireless.co.in/sma-male-to-sma-male-adaptor.htm Thu, 16 Apr 2026 00:00:00 +0530 An SMA Male to SMA Male Adapter is a coaxial RF connector adapter featuring SMA male connectors on both ends. It is used to connect two SMA female connectors or extend cables with female SMA ends. With a threaded coupling design, it ensures a secure, low-loss connection suitable for high-frequency signals up to 18 GHz or more. Commonly used in wireless communication systems, test equipment, and antenna setups.An SMA Male to SMA Male Adapter is a coaxial RF connector adapter featuring SMA male connectors on both ends. It is used to connect two SMA female connectors or extend cables with female SMA ends. With a threaded coupling design, it ensures a secure, low-loss connection suitable for high-frequency signals up to 18 GHz or more. Commonly used in wireless communication systems, test equipment, and antenna setups. http://www.defencewireless.co.in/sma-female-to-sma-female-adaptor.htm http://www.defencewireless.co.in/sma-female-to-sma-female-adaptor.htm Thu, 16 Apr 2026 00:00:00 +0530 An SMA Female to SMA Female Adapter is a coaxial RF connector adapter with SMA female connectors on both ends. It is used to connect two SMA male connectors or extend cables with male SMA ends. Featuring a threaded coupling, it ensures a secure, low-loss connection ideal for high-frequency signals up to 18 GHz or higher. Commonly utilized in wireless communications, test equipment, and antenna systems.An SMA Female to SMA Female Adapter is a coaxial RF connector adapter with SMA female connectors on both ends. It is used to connect two SMA male connectors or extend cables with male SMA ends. Featuring a threaded coupling, it ensures a secure, low-loss connection ideal for high-frequency signals up to 18 GHz or higher. Commonly utilized in wireless communications, test equipment, and antenna systems. http://www.defencewireless.co.in/bnc-female-to-sma-female-adaptor.htm http://www.defencewireless.co.in/bnc-female-to-sma-female-adaptor.htm Thu, 16 Apr 2026 00:00:00 +0530 A BNC Female to SMA Female Adapter is used to connect devices with BNC male connectors to those with SMA male connectors, enabling compatibility across different RF systems. It supports a wide frequency range—typically up to 6 GHz—making it ideal for lab testing, wireless communication, and signal routing applications. Both connectors offer secure mating: BNC with its bayonet coupling and SMA with its threaded design. The adapter is built with precision metal components to ensure durability, low signal loss, and consistent performance. http://www.defencewireless.co.in/tnc-male-to-tnc-male-rf-coaxial-cable.htm http://www.defencewireless.co.in/tnc-male-to-tnc-male-rf-coaxial-cable.htm Thu, 16 Apr 2026 00:00:00 +0530 A TNC Male to TNC Male RF Coaxial Cable is a coaxial cable assembly with TNC male connectors on both ends, designed for secure, threaded connections in RF systems. It provides low signal loss and strong shielding, supporting frequencies typically up to 11 GHz. Commonly used in wireless communications, antennas, test equipment, and telecom applications where durable and reliable RF connections are required.A TNC Male to TNC Male RF Coaxial Cable is a coaxial cable assembly with TNC male connectors on both ends, designed for secure, threaded connections in RF systems. It provides low signal loss and strong shielding, supporting frequencies typically up to 11 GHz. Commonly used in wireless communications, antennas, test equipment, and telecom applications where durable and reliable RF connections are required. http://www.defencewireless.co.in/high-frequency-test-cable-assembly.htm http://www.defencewireless.co.in/high-frequency-test-cable-assembly.htm Thu, 16 Apr 2026 00:00:00 +0530 A High Frequency Test Cable Assembly is a precision coaxial cable setup designed for testing and measuring high-frequency signals, typically in the microwave range. It features low-loss cables and high-quality connectors to ensure accurate signal transmission with minimal reflection or interference. Commonly used in labs, production testing, and RF system diagnostics, these assemblies support frequencies from several GHz up to tens of GHz. They are essential for calibration, network analysis, and device characterization. http://www.defencewireless.co.in/duplex-fiber-optic-patch-cord-cable.htm http://www.defencewireless.co.in/duplex-fiber-optic-patch-cord-cable.htm Thu, 16 Apr 2026 00:00:00 +0530 A Duplex Fiber Optic Patch Cord Cable consists of two optical fibers bundled together in a single cable, allowing simultaneous two-way data transmission. It typically features connectors such as LC, SC, or ST on each end for quick, reliable connections in fiber optic networks. Used in telecom, data centers, and high-speed communication systems, duplex patch cords enable efficient, high-bandwidth networking with minimal signal loss. http://www.defencewireless.co.in/fc-fiber-optic-attenuator.htm http://www.defencewireless.co.in/fc-fiber-optic-attenuator.htm Thu, 16 Apr 2026 00:00:00 +0530 Precise Signal AttenuationDesigned to reduce optical power levels in fiber optic networks—ideal for preventing signal overload in receivers or balancing link loss.FC Connector CompatibilityEquipped with a threaded FC (Ferrule Connector) interface, ensuring secure and low-loss connections in single-mode or multi-mode fiber systems.Fixed or Variable TypesAvailable in fixed attenuation values (e.g., 5 dB, 10 dB) or variable versions for adjustable attenuation—suitable for testing, patch panels, or lab applications. http://www.defencewireless.co.in/uhf-female-to-male-connector.htm http://www.defencewireless.co.in/uhf-female-to-male-connector.htm Thu, 16 Apr 2026 00:00:00 +0530 The UHF Female to Male Connector is an RF coaxial adapter designed to connect a UHF female (SO-239) connector to a UHF male (PL-259) connector. It features a threaded coupling for secure connections and is widely used in CB radios, amateur radio, and antenna systems. Ideal for signal extension and adaptation in low-frequency RF applications up to around 300 MHz. http://www.defencewireless.co.in/sma-male-termination-connector.htm http://www.defencewireless.co.in/sma-male-termination-connector.htm Thu, 16 Apr 2026 00:00:00 +0530 SMA MALE TERMINATION DC-18GHZ  is designed to seal or cap a 20mm coupler, preventing the flow of fluids, air, or signals in hydraulic, pneumatic, or electronic systems when the connection is not active. It serves as a protective barrier to maintain system pressure, avoid contamination, and protect the coupler from damage. Typically made from durable materials, it provides a secure, leak-proof fit for temporary or permanent sealing. http://www.defencewireless.co.in/cat-6-sftp-armoured-lan-cable.htm http://www.defencewireless.co.in/cat-6-sftp-armoured-lan-cable.htm Thu, 16 Apr 2026 00:00:00 +0530 HEAVY DUTY CAT6 SFTP ARMORED ETHERNET CABLE – FEDUS Cat6 SFTP Armored Ethernet Cable is specially designed for outdoor, underground & industrial networking. This Cat6 Outdoor Armored LAN Cable features aluminum wire armoring that protects against rodents, moisture, crushing, and harsh weather, making it perfect for industrial network installations and long-distance data transmission. This Armored Cable is ideal for tough environments where normal LAN cables fail.HIGH SPEED GIGABIT PERFORMANCE – Supports Gigabit Ethernet (1000Base-T) with stable transmission up to 250MHz frequency. This Cat6 SFTP Armored Cable Roll can also handle 2.5Gbps, 5Gbps, and up to 10Gbps (limited distance) with compatible networking devices. Ideal for offices, factories, CCTV networks, and data centers.SFTP SHIELDED DESIGN FOR MAXIMUM PROTECTION – Built with Shielded Foiled Twisted Pair (SFTP) construction, this Shielded Armored Cat6 Cable provides superior protection against EMI/RFI interference. Each twisted pair is individually shielded along with overall shielding, ensuring stable signal transmission, low crosstalk, and minimal data loss. Perfect for high-interference industrial environments.24AWG PURE COPPER TWISTED PAIRS – Engineered with 24AWG 100% pure copper conductors and tightly twisted 4-pair construction for consistent speed and superior signal integrity. HDPE insulation over copper ensures better dielectric strength, lower resistance, and long-term durability in Industrial Armored Cable Cat6 installations.TRIPLE LAYER PROTECTION BUILD – Insulation: PE over Pure Copper Conductors + HDPE Insulation Inner Jacket: PVC Grey Outer Jacket: FR-PVC Black (Flame Retardant) Armoring: Aluminum Wire Protection This Underground Armored Ethernet Cable is built to survive buried, wall, conduit, and outdoor pole installations. The reinforced design makes this Heavy Duty Armored LAN Cable suitable for underground and industrial networking projects.CERTIFIED & TESTED QUALITY – FEDUS Cat6 SFTP Armored Cable is UL Listed, ETL Verified, and EIA/TIA compliant, ensuring safety, durability, and professional networking standards for commercial and industrial use.IDEAL FOR MULTIPLE APPLICATIONS – Perfect solution for: Underground cabling Outdoor building-to-building networking CCTV & IP camera networks Industrial automation systems Data centers & server rooms This Outdoor Armored Network Cable is designed for high-performance and demanding networking environments.AVAILABLE IN MULTIPLE LENGTH ROLLS – Choose the perfect size for your installation: 100m Cat6 SFTP Armored Ethernet Cable 150m Cat6 SFTP Network Cable 200m Cat6 Armored Cable 250m Heavy Duty Armored Cable 305m Cat6 SFTP Armored Ethernet Cable (Full Roll) WEATHERPROOF & LONG LASTING – Designed as a High Speed Armored Internet Cable for all-weather performance. Resistant to UV, moisture, heat, and physical damage, making it a reliable Shielded Armored Cat6 Cable for years of stable networking.▶ HEAVY DUTY CAT6 SFTP ARMORED ETHERNET CABLE – FEDUS Cat6 SFTP Armored Ethernet Cable is specially designed for outdoor, underground & industrial networking. This Cat6 Outdoor Armored LAN Cable features aluminum wire armoring that protects against rodents, moisture, crushing, and harsh weather, making it perfect for industrial network installations and long-distance data transmission. This Armored Cable is ideal for tough environments where normal LAN cables fail.HIGH SPEED GIGABIT PERFORMANCE – Supports Gigabit Ethernet (1000Base-T) with stable transmission up to 250MHz frequency. This Cat6 SFTP Armored Cable Roll can also handle 2.5Gbps, 5Gbps, and up to 10Gbps (limited distance) with compatible networking devices. Ideal for offices, factories, CCTV networks, and data centers.SFTP SHIELDED DESIGN FOR MAXIMUM PROTECTION – Built with Shielded Foiled Twisted Pair (SFTP) construction, this Shielded Armored Cat6 Cable provides superior protection against EMI/RFI interference. Each twisted pair is individually shielded along with overall shielding, ensuring stable signal transmission, low crosstalk, and minimal data loss. Perfect for high-interference industrial environments.24AWG PURE COPPER TWISTED PAIRS – Engineered with 24AWG 100% pure copper conductors and tightly twisted 4-pair construction for consistent speed and superior signal integrity. HDPE insulation over copper ensures better dielectric strength, lower resistance, and long-term durability in Industrial Armored Cable Cat6 installations.TRIPLE LAYER PROTECTION BUILD – Insulation: PE over Pure Copper Conductors + HDPE Insulation Inner Jacket: PVC Grey Outer Jacket: FR-PVC Black (Flame Retardant) Armoring: Aluminum Wire Protection This Underground Armored Ethernet Cable is built to survive buried, wall, conduit, and outdoor pole installations. The reinforced design makes this Heavy Duty Armored LAN Cable suitable for underground and industrial networking projects.CERTIFIED & TESTED QUALITY – FEDUS Cat6 SFTP Armored Cable is UL Listed, ETL Verified, and EIA/TIA compliant, ensuring safety, durability, and professional networking standards for commercial and industrial use.IDEAL FOR MULTIPLE APPLICATIONS – Perfect solution for: Underground cabling Outdoor building-to-building networking CCTV & IP camera networks Industrial automation systems Data centers & server rooms This Outdoor Armored Network Cable is designed for high-performance and demanding networking environments.AVAILABLE IN MULTIPLE LENGTH ROLLS – Choose the perfect size for your installation: 100m Cat6 SFTP Armored Ethernet Cable 150m Cat6 SFTP Network Cable 200m Cat6 Armored Cable 250m Heavy Duty Armored Cable 305m Cat6 SFTP Armored Ethernet Cable (Full Roll) WEATHERPROOF & LONG LASTING – Designed as a High Speed Armored Internet Cable for all-weather performance. Resistant to UV, moisture, heat, and physical damage, making it a reliable Shielded Armored Cat6 Cable for years of stable networking. http://www.defencewireless.co.in/optical-cable-feeder-clamp.htm http://www.defencewireless.co.in/optical-cable-feeder-clamp.htm Fri, 17 Apr 2026 00:00:00 +0530 Used to securely hold and support feeder cables in telecommunications, ensuring stable and organized cable routing. They provide firm grip, vibration resistance, and protection in outdoor or tower installations, commonly used for coaxial, fiber optic, or hybrid cables. http://www.defencewireless.co.in/nokia-long-cpri-cable-rubber-boot.htm http://www.defencewireless.co.in/nokia-long-cpri-cable-rubber-boot.htm Thu, 16 Apr 2026 00:00:00 +0530 DEFENCE WIRELESS dealing with all kinds of *HF VHF UHF Antenna, Defence & Aerospace Military Grade Products, Antenna Mast, RF Telecommunication Passive & Active Components, RF High Frequency Components, Microwave Waveguide Components & Horn Antenna, Optical Fiber Installation Material, Solar Installation Material, 5G IBS DAS Installation Material* *Optical Fiber Products* Optical Fiber Patch Cord, Pigtail, Adaptor, Attenuator, Connector, Join Enclosure, SFP Transceiver Module, LIU, ONT, ONU, FDMS Box, Optical Power Meter, Optical Visual Fault Locator Etc… *Solar Installation Products* MC4 Connector, Branch Connector, Fuse Connector, Diode Connector, DC & AC Cable, ACDB DCDB Box, Junction Box, MCB, Fuse, Holder, Earthing Strip Etc… *Telecom Equipment* RF Coaxial Cable, Antenna, Connector, Adaptor, Splitter, Coupler, Dummy Loads & Termination, Combiner, Duplexer, Triplexer, Quadplexer, Weather Proofing Kit, Sugre Protection Device & Arrestor, Fixed Attenuator, Variable Attenuator, Circulator, Isolator, Bias Te, DC Block, Impedance Matching Pad, Feeder Clamp, Leaky Clamp, RF Band Pass Filter, RF Low Pass Filter, Earthing Kit, Grounding Kit, Jumper Cable, Hosting Grip, Butyle Tape, PVC Tape, RF Balun 50ohm, 75ohm, 120ohm Etc… *High Frequency Components Upto 110Ghz* High Frequency Connector, Adaptor, Attenuator, Dummy Load & Termination, Test Cable Assembly, Phase Stable Cable Assembly, VNA Grade Cable Assembly, Microstrip Splitter, DC Block, Calibration Kit Open Short Load, Test Equipment Site Master, Network Analyzer, Spectrum Analyzer, Power Meter, Power Sensor, Frequency Counter etc… *Microwave Waveguide Components* Waveguide to Coaxial Adaptor, Flexible Waveguide, Rigid Waveguide, Waveguide Horn Antenna, Waveguide Termination, Waveguide Load, Waveguide Twist, Waveguide Directional Coupler, WG Bend, Waveguide Rotary Joint, Wave Isolator, Waveguide Circulator, WG Transition, Loop Coupler, Waveguide Calibration Kit, Waveguide Electromechanical Switch, Elliptical Waveguide, Waveguide Filter, WG Short, Waveguide Filter, Waveguide Probe Coupler. 1. Boot Material PVC (Polyvinyl Chloride): Common for standard indoor cables. TPU (Thermoplastic Polyurethane): Offers better flexibility and durability, often used for rugged applications. IP-rated Rubberized Material: For waterproof and dustproof boots. 2. IP RatingIP (Ingress Protection) rating defines the boot's resistance to water and dust: IP44: Protected against solid objects >1mm and splashing water. IP65: Dust-tight and protected against water jets. IP67: Dust-tight and immersion-resistant up to 1 meter of water. IP68: Dust-tight and protected against long-term immersion in water. 3. Fit and CompatibilityDesigned to fit over the RJ45 modular plug and cable sheath snugly.Available for: Cat5e Cat6 Cat6a Cat7 cables, with slight dimensional differences. 4. Environmental Considerations UV Resistance: For outdoor applications, UV-resistant materials prevent degradation. Temperature Range: Ensures functionality under extreme conditions, such as -40°C to 80°C. http://www.defencewireless.co.in/nokia-short-cpri-cable-rubber-boot.htm http://www.defencewireless.co.in/nokia-short-cpri-cable-rubber-boot.htm Thu, 16 Apr 2026 00:00:00 +0530 DEFENCE WIRELESS dealing with all kinds of *HF VHF UHF Antenna, Defence & Aerospace Military Grade Products, Antenna Mast, RF Telecommunication Passive & Active Components, RF High Frequency Components, Microwave Waveguide Components & Horn Antenna, Optical Fiber Installation Material, Solar Installation Material, 5G IBS DAS Installation Material* *Optical Fiber Products* Optical Fiber Patch Cord, Pigtail, Adaptor, Attenuator, Connector, Join Enclosure, SFP Transceiver Module, LIU, ONT, ONU, FDMS Box, Optical Power Meter, Optical Visual Fault Locator Etc… *Solar Installation Products* MC4 Connector, Branch Connector, Fuse Connector, Diode Connector, DC & AC Cable, ACDB DCDB Box, Junction Box, MCB, Fuse, Holder, Earthing Strip Etc… *Telecom Equipment* RF Coaxial Cable, Antenna, Connector, Adaptor, Splitter, Coupler, Dummy Loads & Termination, Combiner, Duplexer, Triplexer, Quadplexer, Weather Proofing Kit, Sugre Protection Device & Arrestor, Fixed Attenuator, Variable Attenuator, Circulator, Isolator, Bias Tee, DC Block, Impedance Matching Pad, Feeder Clamp, Leaky Clamp, RF Band Pass Filter, RF Low Pass Filter, Earthing Kit, Grounding Kit, Jumper Cable, Hosting Grip, Butyle Tape, PVC Tape, RF Balun 50ohm, 75ohm, 120ohm Etc… *High Frequency Components Upto 110Ghz* High Frequency Connector, Adaptor, Attenuator, Dummy Load & Termination, Test Cable Assembly, Phase Stable Cable Assembly, VNA Grade Cable Assembly, Microstrip Splitter, DC Block, Calibration Kit Open Short Load, Test Equipment Site Master, Network Analyzer, Spectrum Analyzer, Power Meter, Power Sensor, Frequency Counter etc… *Microwave Waveguide Components* Waveguide to Coaxial Adaptor, Flexible Waveguide, Rigid Waveguide, Waveguide Horn Antenna, Waveguide Termination, Waveguide Load, Waveguide Twist, Waveguide Directional Coupler, WG Bend, Waveguide Rotary Joint, Wave Isolator, Waveguide Circulator, WG Transition, Loop Coupler, Waveguide Calibration Kit, Waveguide Electromechanical Switch, Elliptical Waveguide, Waveguide Filter, WG Short, Waveguide Filter, Waveguide Probe Coupler. 1. Boot Material PVC (Polyvinyl Chloride): Common for standard indoor cables. TPU (Thermoplastic Polyurethane): Offers better flexibility and durability, often used for rugged applications.IP-rated Rubberized Material: For waterproof and dustproof boots. 2. IP RatingIP (Ingress Protection) rating defines the boot's resistance to water and dust: IP44: Protected against solid objects >1mm and splashing water. IP65: Dust-tight and protected against water jets. IP67: Dust-tight and immersion-resistant up to 1 meter of water. IP68: Dust-tight and protected against long-term immersion in water. 3. Fit and CompatibilityDesigned to fit over the RJ45 modular plug and cable sheath snugly. Available for: Cat5e Cat6 Cat6a Cat7 cables, with slight dimensional differences. 4. Environmental Considerations UV Resistance: For outdoor applications, UV-resistant materials prevent degradation. Temperature Range: Ensures functionality under extreme conditions, such as -40°C to 80°C. http://www.defencewireless.co.in/h4m-portapack-radio-kit.htm http://www.defencewireless.co.in/h4m-portapack-radio-kit.htm Thu, 16 Apr 2026 00:00:00 +0530 Details : Single power on/off switch- When powered off, the battey will no longer phantom drain, i.e., the device can be completely powered off. Advanced battery management IC and battery display- It is easier to check the battery level. Matte screen- This matte screen can help you see the content of the screen much more clearly in sunny places outside. 360-degree Knob Button- The knob button becomes to be the flat design, going back to the ipod style click wheel. The knob is more convenient to use. The GPIO port- This new generation H4M adds a GPIO port so users can make their own add-ons for the H4M, just like the flipper zero. This is a big step forward, and it's a design that hasn't been in any previous version of Portapack. Improved charge speeds- The H4M improves the charging quality and speed. Built in microphone and switch toggle- There is a toggle to switch between the Built-in and the Headphone Microphone. Automatic switching of sound between the headphone and the speakers- Once you plug the headphone, the H4M will automatically switches from speaker mode to headset mode. This is also a feature that the previous Portapack did not have. http://www.defencewireless.co.in/cable-weather-proofing-kit.htm http://www.defencewireless.co.in/cable-weather-proofing-kit.htm Thu, 16 Apr 2026 00:00:00 +0530 Comprehensive Sealing ComponentsIncludes self-amalgamating tape, PVC tape, and mastic sealing pads—designed to provide a watertight and dustproof barrier around RF connectors, cable joints, and splices.UV and Weather ResistantEngineered to withstand harsh environmental conditions including rain, sun, wind, and extreme temperatures—ensures long-term outdoor performance and protection.Easy Installation and Removal No special tools required—wraps and molds easily around irregular surfaces and can be removed cleanly without damaging cables or connectors.Comprehensive Sealing Components Includes self-amalgamating tape, PVC tape, and mastic sealing pads—designed to provide a watertight and dustproof barrier around RF connectors, cable joints, and splices. UV and Weather ResistantEngineered to withstand harsh environmental conditions including rain, sun, wind, and extreme temperatures—ensures long-term outdoor performance and protection.Easy Installation and RemovalNo special tools required—wraps and molds easily around irregular surfaces and can be removed cleanly without damaging cables or connectors. http://www.defencewireless.co.in/36-feet-aluminum-tubular-antenna-mast.htm http://www.defencewireless.co.in/36-feet-aluminum-tubular-antenna-mast.htm Sat, 18 Apr 2026 00:00:00 +0530 36 feet Aluminiam tubular mast consists of 6 section, each made of 2" Aluminiam pipes of 6 feet long of minimum 2 mm wall thicknessThe section at one end should be dying pressed minimum 6 inches, so that it couples to the other corresponding section properly, Coupling pipe of 12" 2.5mm wall thik For AE mast sections . = (Qty 5)One base plate galvanized of size, 1.57 x 1.5ft x 5mm with holding pipe and 4 ground pegs of 10 inches and 16mm duly galvanized to be provided for fixing it to the ground Three pes of anchors 38x38x5mm thick of 24 inch long with hole for guy rope fitting to be provided Two sets of pvc ropes (3 guys peg set) to be provided at 30ft and 50ft & one 60 ft pvc rope (Total 300 ft) with suitable rope tightens and thimbles. two heavy duty canvases carry bag to be provided for carrying accessories. 1.5kg Hammer 1 pc., Middle guy plate 1pes, Top guy plate 1 pes, patti =6 ,nut Bolt with washer 3", for coupling of mast Sections. (Qty 21) http://www.defencewireless.co.in/42-feet-aluminum-tubular-antenna-mast.htm http://www.defencewireless.co.in/42-feet-aluminum-tubular-antenna-mast.htm Sat, 18 Apr 2026 00:00:00 +0530 42 feet Aluminiam tubular mast consists of 7 section, each made of 2" Aluminiam pipes of 6 feet long of minimum 2 mm wall thicknessThe section at one end should be dying pressed minimum 6 inches, so that it couples to the other corresponding section properly, Coupling pipe of 12" 2.5mm wall thik For AE mast sections . = (Qty 5)One base plate galvanized of size, 1.57 x 1.5ft x 5mm with holding pipe and 4 ground pegs of 10 inches and 16mm duly galvanized to be provided for fixing it to the ground Three pes of anchors 38x38x5mm thick of 24 inch long with hole for guy rope fitting to be provided Two sets of pvc ropes (3 guys peg set) to be provided at 30ft and 50ft & one 60 ft pvc rope (Total 300 ft) with suitable rope tightens and thimbles. two heavy duty canvases carry bag to be provided for carrying accessories. 1.5kg Hammer 1 pc., Middle guy plate 1pes, Top guy plate 1 pes, patti =6 ,nut Bolt with washer 3", for coupling of mast Sections. (Qty 21)Antenna/Tower Height    42 feet (15 mtr) http://www.defencewireless.co.in/n-male-to-n-female-rf-adaptor.htm http://www.defencewireless.co.in/n-male-to-n-female-rf-adaptor.htm Thu, 16 Apr 2026 00:00:00 +0530 An N Male to N Female Adapter is a coaxial RF connector used to connect an N Female connector to an N Male connector. It features a male N-type connector on one end (with a center pin and external threads) and a female N-type connector on the other end (with internal threads and a center socket). This adapter is commonly used in RF communication systems, antennas, cable assemblies, and test equipment to extend cables or change gender without compromising signal quality. It supports frequencies up to 11 GHz or higher with low signal loss and strong mechanical durability. http://www.defencewireless.co.in/cable-weather-proofing-cold-shrink-tube.htm http://www.defencewireless.co.in/cable-weather-proofing-cold-shrink-tube.htm Thu, 16 Apr 2026 00:00:00 +0530 This cold shrink tubing is a fantastic solution to cable and wiring protection. Quick and easy to apply, these kits provide fantastic mechanical and environmental protection to the cable, helping to ensure that impact or environmental ingress don’t interfere with the integrity of the wiring.Features and Benefits Easy to install Houses a wide range of cable sizes Torches and heat not required Thermal stability Seals tight Retains resiliance and pressure Excellent wet electrical properties Tough rubber formulation withstanding rough backfilling Waterproof ApplicationsCold shrink tubing is frequently used to weatherproof or otherwise protect exposed connections or cable ends. It is an efficient way to seal or reinforce wiring that is not covered by a cable sheath, and so is used in many kinds of electrical installations, from manufacturing to domestic wiring. http://www.defencewireless.co.in/sma-torque-male-wrench.htm http://www.defencewireless.co.in/sma-torque-male-wrench.htm Thu, 16 Apr 2026 00:00:00 +0530 Precision Torque ControlAllows accurate application of a specific torque to fasteners (nuts, bolts) to prevent over-tightening or under-tightening—ideal for mechanical, automotive, and industrial applications.Adjustable Torque SettingsFeatures a calibrated scale (in Nm, ft-lb, etc.) that lets users set the desired torque level manually—ensures consistency and reliability across repeated tasks.Durable ConstructionMade with hardened steel or chrome-vanadium alloy for long service life, often with an ergonomic handle for comfortable grip and control. http://www.defencewireless.co.in/antenna-mast.htm http://www.defencewireless.co.in/antenna-mast.htm Sat, 18 Apr 2026 00:00:00 +0530